- High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
- Crown Switching Power Supply for lighter weight
- Selectable “Constant-Voltage” or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
- 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
- Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
- 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· Fault Isolation Topology circuitry on 4- and 8-channel models isolates faults without affecting neighboring channels
- Comprehensive array of indicators provide accurate diagnostics
- Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.
Specifications
| Channels | 2 |
| Sensitivity | 1.4 V |
| Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) | 105 dB |
| THD (full rated power, 20 Hz – 20 kHz) | < 0.1% |
| Damping Factor (10 Hz to 100 Hz) | <3000 |
| Frequency Response (at 1W, 4/8 ohms) | +/- 0.25 dB |
| Crosstalk (below rated power) 20 Hz to 1 kHz | > 80 dB |
| Common Mode Rejection (20 Hz to 1 kHz) | > 50 dB |
| Maximum Input Level before Compression | +20dBu |
| Load Impedance | 70V, 100V (2-16 Ohms) |
| Voltage Gain (at maximum level settings) (8/4 ohm operation) | 35:1 (31 dB) |
| Power Draw at Idle (120VAC mains: standby mode) | 24W |
| Dimensions | 3.5″ x 19″ x 14.25″ |
| Weight | 22.8lbs |
| Shipping Weight | 27.7 lbs |
