Flightcases
Martin Professional EC 20 LED Screen 41,47m2 + Martin P3, including 1/8 flightcase. LED Screen video wall. Used for sale. 20mm pixel pitch. LED Wall.
120x Martin EC-20 Panel + 15 flightcases (8 pieces per flightcase)
1x Martin P3-100
Rigging on request
Including 1/8 flightcase, rigging on request. This is the 20mm pixelpitch version of the 10mm pixelpitch version.
The EC series represents the new generation of indoor and outdoor LED screens, combining low weight and creativity with state-of-the-art image quality.
Features
- Outstanding image quality and elegant, cable-free design
- Pixel level color and intensity calibration
- Flexible – integrated curving and full integration with lighting control
- Lightweight, yet strong
- Fast to assemble, no tools, no cables
- Powerful P3 system processor, easy setup procedure
- Reliable, built to the highest standards
- Brightness: 4000 Nit (calibrated)
- 20 mm pixel pitch, semi-transparent design
This LED screen is using a built in connector system, so link the LED screens and the power and data is automatically connected.
EC-20 series panels communicate using the Martin P3 signal format (Ethernet Martin™ P3™ Protocol). The P3 signal contains both video data and command signals.
The Header has an integral data input tail and throughput connector, and EC-20 panels have integral P3 data input and throughput connectors (see D and F in Figure 17 on page 18). P3 data is therefore connected automatically when panels are fastened together in a vertical column.
Cable and connector types Use good-quality CAT 5e or better STP (shielded twisted pair) Ethernet cable for the P3 link to the Header. RJ-45 connectors should be shielded type, with the shield around the connector terminals electrically connected to the cable shield.
The Ethernet socket on the Header is mounted in an Amphenol IP67-rated reverse bayonet-mount housing.
RJ-45 plugs installed in Amphenol RJF RB 6 housings (as supplied with the Headers) or in an indoor environment non-IP-rated standard RJ-45 Ethernet connectors and patch cables may be used as connectors on the link.
All unused connectors must be sealed with their supplied rubber caps at all times.
Suitable IP67-rated and non IP-rated patch cables in various lengths and suitable connector housings are
available from Martin
