Nexo LS1200 Sub

745.00 excl. VAT


Price:

Out of stock

Categories: , Tags: , ,
  • Description

Product Description

Condition:
Description:

Nexo LS1200 Sub including flightcase.

 

PRODUCT FEATURES
Components : VLF 1 x 18″ ( 46cm ) long excursion 6 Ohm driver
Height x Width x Depth: 515 x 791 x 597 mm (20.25″ x 31.13″ x 23.5″ )
Weight: 45 kg (99 lbs) net
Connectors: 2 x NL4MP SPEAKON 4 pole
Construction: Baltic Birch Ply & textured, polyurethane black coating
Fittings:
– Handles: 2, integral to cabinet
– Front finish: Perforated steel grilles
– Flying Points: 3 steel anchor points for flying tracks on side and back
– Stand fittings: Internal Stand Fitting on Top (35mm, 1 3/8″) accepts a mast supporting 1 PS15.
SYSTEM SPECIFICATIONS LS1200 with PS15 TDController MkII
Frequency Response [a]: 30 Hz – 120 Hz ±3dB
Usable Range @-6dB [a]: 29 Hz – 130 Hz
Sensitivity 1W @ 1m [b]: 102 dB SPL Nominal
Nominal Peak SPL @ 1m [b]: 133 to 135 dB Peak (800 to 1200 W RMS Amp.)
Crossover Frequencies: 80 Hz Active through PS15TD
Nominal Impedance: 4 Ohms
Recommended Amplifiers: 800 to 1200 Watts into 4 Ohms
SYSTEM OPERATION
Electronic Controller
The LS1200 Subwoofer must be used with a Nexo Controller (PS15 TD MkII analogue or NX241 digital). Use without a properly connected Controller will result in poor sound quality and may damage the components.
Subbass
The LS1200 Subwoofer provides optional VLF extension for PS15 Loudspeakers. Active two-way operation with the PS15 is included in the PS15TD MkII, or NX241.
Speaker Cables
The PS15 is wired 2- & 2+ on Speakon connectors, LS1200 on 1- & 1+. Loop through
Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS15 (passive mode) & 1 x LS1200 in no particular order.


Product video: